Zero Installation Purifier spout replacement steps:
- Remove the top tank from the Zero Installation Purifier’s base for easy access as shown in the following video:
- Unscrew the holding nut (shown below) located inside the top tank to remove the
existing faucet.
- Replace the faucet with new one and make sure 2 white seals are on each side of the top tank.
- Hand tighten the holding nut to secure the faucet.
- Fill the top tank with water to test for leaks. If the leaks occur make sure that white seals are on each side and tighten the holding nut a bit more.
- Place the top tank back into Zero Installation Purifier as shown in the video above(step 1) to avoid leaks.